Small environmental
chamber controller
For builders and users of small humidity and environmental chambers. We customise the RD150 interfaces to your chamber sensors and actuators, so temperature, humidity and test duration run as one programme with a full record.
THE PROBLEM
A chamber test is a temperature, a humidity and a time, all at once
Small environmental chambers are used to condition samples before testing, run humidity exposure on components and packaging, and hold product at set conditions for a defined period. The test only means something if all three values held together and the run lasted as long as specified.
Chamber makers serving this market need a controller that combines those values, keeps a record the customer can file and fits their own chamber hardware. Chamber users need to know early whether a chamber can run the test their standard describes.
HOW WE SET IT UP
Matched to the chamber and the test
Interfaces customised to your hardware
We customise the RD150 interfaces for the sensors and actuators in your chamber: heaters, humidifiers and the cooling or dehumidifying stage where there is one.
Test profiles as recipes
Temperature, humidity and duration are stored together as a test profile. A chamber that runs several test conditions keeps each as a recipe and runs it for exactly the set time.
Test specification reviewed first
Environmental test specifications vary widely in ranges, ramp rates and tolerances. We review your specification at the start and match it to the chamber, sensors and actuators, so the design is right for the tests you plan to run.
A record for every test
Connected units send temperature, humidity and duration to RIOD Live or your own server. Each run exports as a PDF or Excel report with an audit trail for the test file.
AT A GLANCE
Environmental chamber control with the RD150
- What is measured
- Temperature, humidity and test duration
- Hardware
- RD150 temperature, humidity and timer controller with interfaces customised to your chamber
- Programmes
- Multiple stored test profiles
- Connectivity
- Optional connected variant, MQTT over TLS 1.2 to RIOD Live or your own server
- Reports
- PDF and Excel exports with audit trails, AI access to data via MCP
- Engineering note
- Each environmental test specification is reviewed against the chamber design at the start of the project
FAQ
Questions buyers ask us
What does a small environmental chamber controller need to do?
Hold temperature and humidity together for a defined duration and record that they held. The RD150 runs temperature, humidity and time as one stored profile and, in connected versions, logs each run to the cloud or your server.
Can the RD150 run any environmental test standard?
That depends on the chamber hardware as much as the controller. Test specifications differ in range, ramp rate and tolerance, so we review yours at the start and match it to the chamber hardware and sensors. Where a test is to be formally qualified, certification work to your target standard is planned into the project.
Can it control a humidity chamber with cooling or dehumidification?
We customise the RD150 interfaces for the actuators your chamber uses, including heaters, humidifiers and a cooling or dehumidifying stage where the design has one.
Can we get a report for each chamber test run?
Yes. A connected RD150 sends temperature, humidity and duration to RIOD Live or your own server, and each run can be exported as a PDF or Excel report with an audit trail.
Building or upgrading environmental chambers?
Tell us the chamber, the tests you run and the conditions they call for. We will show you how the RD150 fits.